Cold Rolling Mill PS-8, PS-10

Cold Rolling Mill PS-8, PS-10

9.1 Стан холодной прокатки+PS-8 cold-rolling mill is intended for cold-rolling of copper casting with the diameter up to 20 mm and obtaining of 8 mm soft wire (wire rod).

 

 

 

 

 

PERFORMANCE PARAMETERS

No Parameter name Parameter value
PS-8 PS-10
1. Roll type 3-high roll mill
2. Number of stands, pcs 8 10
3. Casting material copper
4. Strength limit, MPa, copper 250
5. Casting inlet diameter, mm 16-20
6. Outlet diameter, mm 8 ± 0.2
7. Outlet rolling rate, m/s max 3
8. Roll diameter, mm 270 (Cr12MoV)
9. Output, t/year 12 000
10. Emulsion system Consumption, m3/hour 18
Operating pressure, kgf/cm2 2.2
Emulsion temperature, °C 35-45
Emulsion volume, m3 7.65
Cooling water, m3 50
11. Lubrication system Consumption, m3/hour 7.5
Operating pressure, kgf/cm2 3.6
Temperature (oil), °C 35-45
Oil volume, m3 1.7
Energy source parameters voltage, V 380/220
frequency, Hz 50
12. Installed power, kW 375
13. Mill dimensions Length, mm 12 000
Width, mm 3 000
Height, mm 3 000